Optimum Space Utilization :
Real Life Image :
OVERALL SIZE
Width - 1946 mm
Depth in sofa condition (±10mm) - 1078 mm
Depth in Bed condition (±10mm) - 2148 mm
Height - 2312 mm without levelers
Seat Height (±10mm) - 420 mm
Seat Width (±10mm) - 1610 mm
Seat depth with cushion placed at back (±10mm) - 420 mm
Mattress frame height from ground without mattress (±10mm)- 510 mm
Armrest height from ground (±10mm) - 630 mm
Mattress panel dimensions -1590 x 2137
Recommended Mattress Size - 78"x 60"x6" Max (one-piece)
Recommended Mattress Weight - 23 to 30 kg
Recommended Mattresses:
Ortho Regular/Ortho Plus (78 x 60 x 4), Accupadic Mat (78 x 60 x 5/6), Spinefine (78 x 60 x 5), Elegenza (78 x 60 x 6), D-Plus (78 x 60 x 5/6) or equivalent
TECHNICAL SPECIFICATIONS :
BED-BASE/MATTRESS PANEL
1.The bed vertical structure is made of combination of 25mm & 18mm E1 grade Prelaminated Particle Board, The main load bearing panels are made in 25 mm while rest of the panels are 18 mm.
2.The mattress frame is made of MS tube of 50x25x1.6 mm. The complete frame is fixed with 18mm Prelaminated Particle Board front panel. The mattress frame has wooden slats for resting the mattress
3.The mattress frame has a provision for fixing the Nylon belt type Mattress arrester and a rear metal stopper to retained the mattress on the bedstead in closed position
4.The mattress frame is mounted on an openable mechanism which opens up in horizontal position for usage as bed and can be closed in vertical position when not in use.
5.An 8.0 mm thick MS leg is provided to support the mattress frame in horizontal bed position. The same is to be used to open the mechanism and convert it into the bed
3-SEATER SOFA (OF WALL BED)
1.The under storage below sofa seat is made of combination of 18 & 9 mm thick E1 Grade Prelaminated Particle Board panels. The sofa seat structure is made of Pinewood sections of 34 x 64 mm. Zigzag spring of dia. 3.8 mm is mounted on the seat structure for support and additional cushioning
2.Non woven fabric is stapled on the seat structure frame above the spring assembly to avoid direct contact between the metal spring and seat foam. This prevents seat foam from tearing
3.Powder coated MS support pipe is fixed with the wooden seat frame to give the additional strength to the structure
4.The armrest structure is made of combination of plywood & pinewood members. Plywood is 12±1mm thick & pinewood are of cross section 16x35mm
5.Seat Foam - The sofa seat is made of PU foam with density 28kg/m3 with a top layer of super-soft PU foam with density 32 kg/m3. The seat front is also foamed with a super-soft PU foam with 32 kg/m3
6.Armrest Foam - The armrest is made of PU foam with density 28kg/m3 from top, sides and front
7.The Back cushions on the sofa are filled with the Recron
8.Upholstery - The seat and armrest upholstery is made of plain polyester fabric, while the back cushions are upholstered with combination of Plain and jacquard fabric.
9.The seat is openable and is fitted with lift up mechanism to access the under-storage
WALL-BED GENERAL
•All the 18 and 25 mm thick Prelaminated Particle Board panels are provided with 2 mm thick PVC lipping
•Bed and sofa Lift up is made of MS and provided with gas lift and spring
•KD fitting and dowels are of Hettich, Levelers to the bed are Ebco make
CONSTRUCTION: Knock Down construction. The assembled bed needs to fixed with the wall
FINISH:
•All prelaminated particle board panels of bed structure are in Brown wood grains with matching lipping
•The storage below the sofa seat is solid Grey color with matching lipping
•The complete sofa is upholstered in combination of plain and Jacquard fabric
•All the Metal components and frames are powder coated
WARDROBE
OVERALL SIZE: Width - 900 mm x Depth - 378 mm x Height - 2312 mm
MATERIAL
•All the carcass panels are made of 18 mm thick E1 grade prelaminated particle board
•The 6 doors are made of 18mm Prelaminated Particle Board, fitted with hinges and push to open fittings
•The 2 doors are 18 mm Thick E1 grade PU Painted MDF, fitted with hinges and push to open fittings
•All the shelves are are made of 18mm E1 grade prelaminated Particle Board
•The back panels are made of 9.0 mm thick E1 Grade prelaminated particle board and are fixed in the grooves. The lower back panels have perforation for air ventilation
•All the 18 mm thick Prelaminated Particle Board panels are provided with 1.5 mm thick PVC Lipping.
•Hinges, KD fitting and dowels are of Hettich
•Push to open Fittings are Ebco-make
CONSTRUCTION: Knock Down construction
FINISH: All the prelaminated particle board panels are in Brown wood grains with matching lipping. PU Painted panels in Cream Color are MDF High Gloss
COFFEE-CUM-LAPTOP-CUM-DINING TABLE
OVERALL SIZE: Width - 1200 mm x Depth - 750 mm x Height – 405/605 mm
MATERIAL
•All the panels are made of 18 mm thick E1 grade prelaminated particle board
•The top panel is mounted with lift-up mechanism to lift the top panel and convert it to a multipurpose table
•A shelf with retainer is provided below the top panel
•All the 18mm Prelaminated Particle Board panels are provided with 1.5 mm thick PVC lipping
•KD fitting and dowels are of Hettich
•The table lift mechanism is Ebco-make with damper.
•Hinges, KD fitting and dowels are of Hettich
•Push to open Fittings are Ebco-make
CONSTRUCTION: Knock Down construction
FINISH: All the prelaminated particle board panels are in Brown wood grains with matching lipping
COFFEE-CUM-LAPTOP-CUM-DINING TABLE
OVERALL SIZE: Width - 1200 mm x Depth - 750 mm x Height – 405/605 mm
MATERIAL
•All the panels are made of 18 mm thick E1 grade prelaminated particle board
•The top panel is mounted with lift-up mechanism to lift the top panel and convert it to a multipurpose table
•A shelf with retainer is provided below the top panel
•All the 18mm Prelaminated Particle Board panels are provided with 1.5 mm thick PVC lipping
•KD fitting and dowels are of Hettich
•The table lift mechanism is Ebco-make with damper.
•Hinges, KD fitting and dowels are of Hettich
•Push to open Fittings are Ebco-make
CONSTRUCTION: Knock Down construction
FINISH: All the prelaminated particle board panels are in Brown wood grains with matching lipping
POUF
UNDER-STRUCTURE:
•Under-structure is made up of plywood & it is covered with 3 mm MDF from the periphery
•Plywood used is 12±1mm thick
FOAM:
Pouf top is made of PU foam with density 28 kg/m3 with a top layer of super-soft PU foam with density 32 kg/m3. The Periphery is made of PU foam with density 28 kg/m3
UPHOLSTERY:
The upholstery is made in combination of Jacquard and Plain fabric (Grey Colour)
LEGS:
Rubberwood legs are fitted at the bottom surface of the Pouf. Legs are coated with PU clear coat [matt finish].
Comments